Jan 22, 2024 Leave a message

How Is The Speed Of Light Measured?

The speed of light is also an important parameter of light, its determination in the history of the development of optics has a very special and important significance, not only to promote the deep development of optical experiments, but also to break the traditional concept of the speed of light infinite. In the development of the theoretical study of physics, the determination of the speed of light for the particle theory and the fluctuation theory of the debate provides a basis for judgment, and ultimately promote the discovery and development of Einstein's theory of relativity.

How the speed of light is measured

1. Prologue to the Measurement of the Speed of Light
There was a dispute in physics about the speed of light. Both Kepler and Descartes believed that light traveled without time and in an instant. Galileo believed that the speed of light, although unusually fast, could be measured, and in 1607, Galileo conducted the earliest experiment to measure the speed of light. Galileo's method of measurement is to let two people were standing 1.6093km apart on the top of two mountains, each with a lamp, the first person to raise the lamp, when the second person saw the first person's lamp immediately raised his own lamp, from the first person to raise the lamp to see the second person's lamp is the interval between the light propagation time, and then according to the distance between the two places will be able to get the speed of light propagation. However, due to the speed of light propagation is too fast, coupled with the observer must also have a certain reaction time, so Galileo's attempts did not succeed, but Galileo's experiment is the opening of human history on the speed of light propagation to measure the prelude to the study.

2. Astronomical Measurement
In 1676, the Danish astronomer Rømer first proposed a more effective method of measuring the speed of light. Any periodic process can be used as a "clock", and he succeeded in finding the clock of Jupiter, which is very far away from the Earth: aeclipsed by Jupiter every certain period. He observed that the time between two consecutiveeclipses, when the Earth back from Jupiter movement, than the Earth's movement towards Jupiter longer than the time difference of about 15 s. Romer through the observation of Jupiter'seclipses and the Earth's orbital diameter of the speed of light: 214300km per second. this value from the speed of light of the accuracy of the value of the difference is very large, but this is not the measurement method is not right, the main thing is that the then Know the radius of the Earth's orbit is only an approximation, while the measurement ofeclipsing period is not accurate enough. Later, scientists used the photographic method to measure the time of Jupiter'seclipses, and the accuracy of the measurement of the Earth's orbital radius is improved, using the Romer method to find the speed of light propagation is 299840 per second 60km, very close to the accurate value of the modern laboratory measurements.

In 1728, the English astronomer Bradley measured the speed of light using the method of light traveling difference of stars. While observing stars on Earth, Bradley noticed that the apparent positions of the stars were constantly changing, and that within a year all the stars appeared to orbit an ellipse with equal half-length axes around the zenith for a week. He attributed this phenomenon to the fact that it took some time for the light from the stars to travel to the ground, and that during this time the earth had changed position by rotation, from which he measured the speed of light to be 299,930km per second.

3. Gear Measurement
In 1849, the French scientist Fissot first used a designed experimental device to determine the speed of light propagation, and his principle of measurement was similar to that of Galileo. He placed a point light source in the focal point of the lens, between the lens and the light source to put a gear, in the lens on the other side of the far side of the other lens and a plane mirror placed in turn, the plane mirror is located in the focus of the second lens. Point light source issued by the light through the gears and lenses into parallel light, parallel light through the second lens and then in the plane mirror gathered at a point, in the plane mirror after reflection in the original way back. Since the gear has a gap and teeth, when the light passes through the gap when the observer can see the return light, when the light happens to meet the teeth will be obscured. The time from the beginning to the first disappearance of the returning light is the time taken by the light to make one round trip, and according to the speed of the gears, this time is not difficult to find out. In this way, Fischer measured the speed of light to be 315,000 kilometers per second, and because the gears were of a certain width, it was difficult to accurately measure the speed of light propagation using this method.

In 1850, French physicist Foucault improved Fisso's method by using only a lens, a rotating plane mirror and a concave mirror. Parallel light converges on the center of the concave mirror through the rotating plane mirror, and the same rotational speed of the plane mirror can be used to find the round trip time of the light beam, and the speed of light measured in this way is 298,000km per second.

4. Microwave measurement method
Light waves are a small part of the electromagnetic spectrum, scientists of the electromagnetic spectrum of each kind of electromagnetic wave parameters are carried out precision measurements. 1950, Eisen proposed a cavity resonance method to measure the speed of light. The principle of measurement is:Microwave through the cavity, when its frequency is a certain value will resonate, the resonance wavelength λ and the resonance cavity of the circumference of the circumference of the relationship between R as:
R=2.404825λ

And then according to the product of wavelength and frequency will get the speed of light. By accurately measuring the diameter of the resonance cavity can determine the exact resonance wavelength, while the diameter of the cavity can be accurately measured by interferometric methods, the electromagnetic frequency can be accurately determined by step-by-step differential frequency method. Eisen with his proposed method to get the speed of light for 299792.5 s 1km per second, the measurement accuracy of 10-7.

5. Laser Measurement
In 1972, the National Institute of Standards and Technology (NIST) in Boulder, Colorado, USA, utilized laser interferometry to determine the speed of light, yielding c=299792456.2±1.1m/s, and obtaining a measurement accuracy of up to 10-9, which is 100 times more accurate than the previous measurement. Since similar experiments yielded similar values for the speed of light, the 17th International Conference on Weights and Measures in 1983 recommended 299792458m/s as the value for the speed of light.

Image Chronology of Light Speed Measurements

The speed of light has been on a journey of more than 300 years of measurements and has finally been finalized. In the process of inquiry, scientists perfectly combined theory and practice, calculation and measurement, and finally obtained an accurate value of the speed of light.

The determination of the speed of light not only affects the definition of the unit "meter", but also helps further research. Standard units such as the speed of light and the "meter" may seem trivial, but they have witnessed the progress of human civilization. Science has no limits, and mankind's journey to explore the world has just begun.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry