Laser Welding Machine Handheld
Laser Welding Machine Handheld
Product introduction
Laser welding machine handheld is a highly efficient and precise welding method using a high energy density laser beam as the heat source.The welding process is of the heat conduction type, i.e. the laser radiation heats the surface of the workpiece and the surface heat spreads to the inside of the material through heat conduction. By controlling parameters such as the width, energy, peak power and repetition frequency of the laser pulse, the workpiece melts and forms a specific molten pool, thus automatically combining workpieces of different materials, thicknesses and coatings to form a single piece of material. Laser welding is one of the most important technologies for processing applications of industrial material.
Product features
Start-up screen of laser welding machine
|
Laser Control |
Power |
The peak power of the handheld laser during welding. |
|
Frequency |
Used to set the frequency of the laser PWM modulation signal. 3000-5000Hz. |
|
|
Duty cycle |
Can reduce the laser energy, 100% is full energy, generally default 100%. |
|
|
Hand-held Head Control |
Model |
Motor swing mode, 6 light spot modes are optional. |
|
Frequency |
The frequency of motor oscillation, Don't set it too high, generally 8-12Hz (1Hz=10 circles/S). |
|
|
Width |
The width of the motor swing, 0.2-5mm adjustable light spot. |
|
|
Gas Control |
Advance amount |
Gas blowing time in advance (recommended value 200ms). |
|
Delay amount |
Gas delay blowing time (recommended value 200ms). |
|
|
Proportional valve |
If the laser welding machine is connected with a proportional valve to control the gas size, this function can be used to control the size of the protective gas. |
|
|
Hand-held Head Status |
/ |
Refers to the state of the motor, under normal conditions, it will be on when power is on (within 5s), the indicator light will be off when the motor is abnormal. |
|
Conduction State |
/ |
Ground clip, when the tip and clip form a loop, the conduction state lights up. |
|
Welding Gun Status. |
/ |
When the light-emitting button of the hand-held head is pulled, the status light of the welding gun is on. |
|
Gas |
/ |
When the manual test light is on, the air blowing signal takes effect (please turn off the gas button during automatic welding); the air valve port will output 24V voltage, no need to turn on the gas, and the air will be automatically blown during welding. |
|
Shutter |
/ |
Control of the laser light signal (the shutter button will automatically close after 15 minutes of no operation) |
|
Wire Feed. |
/ |
When the wire feeder is turned on, the wire feeder will feed the wire when the light is emitted, and when the wire feeder is turned off, the wire feeder will not be controlled by signals such as the welding gun. |
Hot Tags: laser welding machine handheld, China, manufacturers, suppliers, low price, mig welding, laser welding metals, handheld laser welder, high quality welding, Laser welding manufacturer, low power welder
You Might Also Like
Send Inquiry