200W Pulse Laser Cleaning Machine

200W Pulse Laser Cleaning Machine

Product introduction

With the increasing use of high-tech manufacturing processes in various industries, the demand for efficient and effective cleaning machines has grown substantially. The 200W pulse laser cleaning machine from MRJ-Laser has become a popular choice due to its ability to clean delicate and complex surfaces without causing any damage or deformation.

The 200W pulse laser cleaning machine uses high-intensity laser beams to remove residues, coatings, and impurities from surfaces. With a maximum power output of 200W, the machine is able to efficiently strip away rust, paint, oil, and other contaminants from various surfaces, including metal, concrete, brick, and ceramics. This eliminates the need for chemical solvents and abrasive cleaning methods, which can be harmful to both the environment and the surfaces being cleaned.

The laser beam can be adjusted to target specific areas without affecting the surrounding surface. This means that even delicate and complex surfaces, such as those found in the aerospace and medical industries, can be cleaned without any damage or deformation. Additionally, the machine can be programmed to operate in various modes, including pulse and continuous, depending on the type and thickness of the material being cleaned.

Product parameter

Laser cleaning machine in the photovoltaic industry applications are mainly in the following areas:

• PV module cleaning: The surface of PV modules can be covered by sand, dust or other debris, resulting in lower cell power generation efficiency. The use of laser cleaning machine can remove any dirt and debris on the surface of the module to restore the module's power generation efficiency.
• Silicon wafer cleaning: During the production of silicon wafers, oxides may remain on the surface, such as silicon oxide, etc. These gases can seriously affect the quality and conversion efficiency of silicon wafers. The use of laser cleaning machine can remove the oxides on the surface of silicon wafers and improve the quality of silicon wafers.
• Cell cleaning: The front side of the cell is covered with a reflective cover and some adhesions remain on the surface, which will affect the power generation efficiency of the cell. The use of laser cleaning machine can remove the reflective coverings and adhesions on the surface of the cell, and improve the power generation efficiency of the cell.

Hot Tags: 200w pulse laser cleaning machine, China, manufacturers, suppliers, low price