Prof. Qiu Min's group at Westlake University has successfully developed a new type of homogeneous silicon carbide (4H-SiC) superlens, which provides a brand new solution to the problem of thermal drift in high-power laser processing.
Compared with conventional commercial objective lenses, the superlens is not only able to achieve diffraction-limited focusing, but also maintains stable performance under prolonged high-power laser irradiation, which is virtually unaffected by thermal absorption.
4H-SiC materials have attracted attention for their excellent properties: high transmittance and refractive index for optics, high thermal conductivity for thermal management, and high hardness and scratch resistance for mechanical properties. These properties make it an ideal material for high performance optics and high power devices.
The new superlens utilizes the high thermal conductivity and low loss characteristics of 4H-SiC material to effectively suppress the thermal drift effect and get rid of the reliance on complex cooling systems.
This technological breakthrough not only provides key support for high-power laser systems, but also brings new possibilities for precision instrument manufacturing, polar exploration,and many other fields. Especially in the field of extremely high requirements for processing accuracy and surface quality, 4H-SiC superlens can play an important role in providing more efficient and compact solutions for high-power laser applications.
1. A new idea to solve the thermal drift problem of high-power lasers
In a chance encounter, the researchers noticed a thorny problem commonly found in enterprise production: during the continuous operation of high-power laser precision cutting on the production line, the objective lens will deform its internal optical elements due to the continuous thermal accumulation, which will ultimately affect the processing shape and consistency.
This is because when high-intensity laser light strikes an optical device, the material absorbs some of the light energy and converts it into heat. For materials such as silicon oxide (quartz) and calcium fluoride (fluorite), which have low thermal conductivity, it is difficult to conduct the heat efficiently and in a timely manner, resulting in localized overheating of the device.
To solve this problem, the group prepared a transparent 4H-SiC material as a special superlens. The device is thinner than a one-dollar coin, and its surface is covered with hundreds of millions of nanopillars with a diameter of about 200-400 nanometers and a depth of about 1 micron.
"Thanks to the high refractive index of the silicon carbide material, we were able to manipulate the wavefront phase of light by tuning the size of the nanopillars to achieve a focusing function comparable to that of commercial lenses. Combined with the excellent thermal conductivity of the material itself, better heat dissipation performance is realized in a thinner and lighter device." Chen Botao describes.

Figure 丨 4H-SiC superlens (left) and SEM characterization (right) (Source: Botao Chen)
2. Experimental Verification of Excellent Thermal Stability
In the experiment, the researchers simulated a real-life industrial scenario by irradiating a Mitutoyo microscope objective lens (the industry's leading commercial objective lens) and the 4H-SiC superlens developed by the team with a high-powered laser at the same time.
The results show that under 15-watt, 1030-nm pulsed laser irradiation for one hour, the temperature of the 4H-SiC superlens increased by only 3.2°C, and the focus shift was only one-tenth of that of a conventional objective lens.
The traditional heat dissipation method is usually to install a water cooling ring outside the objective lens to remove the heat absorbed by the device by circulating the cooling water. Not only is this solution complex and costly, it also significantly increases energy consumption and carbon emissions, and requires additional systems to keep the water-cooling device running.
In contrast, the team's proposed solution eliminates the need for any heat dissipation components by simply mounting the superlens on a mirror frame and utilizing highly efficient solid-state heat transfer to rapidly export the heat. This not only allows for continuous and stable operation, but also greatly simplifies use and maintenance requirements.

Figure 丨 Schematic diagram of the thermal drift effect of the 4H-SiC superlens (left) and the conventional objective lens (right)
3. Overcoming Processing Challenges and Moving Toward Mass Production
As a high-hardness material with a Mohs hardness second only to diamond, silicon carbide is extremely difficult to process. Although it has been used in high-power chips for new energy vehicles, two-dimensional transistors are significantly different from micro- and nano-optical devices with three-dimensional structures.
"We need to process hundreds of millions of small hundred-nanometer-sized pillars in an area the size of half a coin. Not only do these nanopillars have to be thin and deep with a consistent shape, but the alignment precision is required to be extremely high, adding to the difficulty of processing." Chen Botao said.

Photo 丨Qiu Min's group photo
It is worth mentioning that the team adopted a micro-nano processing process that is compatible with mass production. Qiu Min's group's more than 20 years of technical accumulation in the field of micro-nano optoelectronics has laid a solid foundation for this research.
In the process of exploring the processing process, the researchers fully considered the application of scientific research results and market demand, so the amplitude of the device must be large enough to realize the complete replacement of traditional objective lenses. Based on the previous accumulation of technology, they have improved this processing process and released products for augmented reality glasses.
Currently, the researchers have produced a variety of silicon carbide superlenses for different needs, and have developed a detailed program dedicated to the direction of low cost and high yield. According to the report, this unique process has been applied to several cooperative enterprises. In addition, the team is also working with several institutions to promote the continued development of this technology.





