The performance and stability of the laser marking machine is affected by the combination of various factors. Generally speaking, the more expensive the laser marking machine is, the more stable the performance stability is. The performance and stability of the laser marking machine can be seen in these four factors:
1. Technology level. The technological level has an impact on all aspects of the laser marking machine, especially the installation of the beam expander, galvanometer, and marking needle. If the installation position is not adjusted properly, it will cause the deviation of the marking position and affect the laser spot mode.
2, the environment. Ambient temperature has a significant impact on the operation of the laser marking machine. If the ambient temperature is too high or too low, the cooling capacity may be unstable. At this time, the marking effect will be unstable. It is necessary to go outside to the laser marking machine. Cool down or keep warm.
3, the focal length is not accurate. The focal length of the laser marking machine will also cause the performance of the laser marking machine to be unstable. At this time, the focal length needs to be adjusted.
4. The lens has abrasion dust. The laser beam of the laser marking machine is engraved and marked on the material through the lens. Once the lens wears dirt, the laser beam is easy to shift, resulting in a poor marking effect. At this time, it is necessary to clean the lens. After the lens is still not effective, the lens must be replaced.
