Recently, King Abdullah University of Science and Technology (KAUST) has presented a research result that may help improve the anode material for next-generation batteries.
It is reported that KAUST demonstrated the use of laser pulses to modify the structure of a potential alternative electrode material called "MXene" to improve its energy capacity and other key properties.
In the study, the scientists explained that graphite contains flat layers of carbon atoms, and during battery charging, lithium atoms are stored between these layers in a process known as "embedding". The structure of the "MXene" material also contains layers that can hold lithium, but these layers are made of transition metals such as titanium or molybdenum combined with carbon or nitrogen atoms, which makes the material highly conductive.
These layers also have additional atoms, such as oxygen or fluorine, on their surfaces. The molybdenum carbide-based "MXene" material structure has a particularly good lithium storage capacity, but its performance also deteriorates rapidly after repeated charge/discharge cycles.
The KAUST team, led by Husam N. Alshareef and Zahra Bayhan, found that this degradation is caused by chemical changes in the MXene structure that form molybdenum oxide.
To solve this problem, they used infrared laser pulses to create small "nanodots" of molybdenum carbide in the structure of the "MXene" material, a process known as "laser scribing. The process is called "laser scribing. These nanodots, which are about 10 nanometers wide, are attached to the layers of the MXene structure by carbon.
This offers several benefits: First, the nanodots provide additional storage capacity for lithium and speed up the charging and discharging process. The laser treatment also reduces the oxygen content of the material, helping to prevent the formation of problematic molybdenum oxides. Finally, the strong connections between the nanodots and the layers improve the electrical conductivity of the "MXene" material structure and stabilize it during the charging and discharging process.
In a press statement, Bayhan said, "This provides a cost-effective and fast way to tune the performance of batteries."
The researchers made an anode with the laser-inscribed material and tested it in a lithium-ion battery with more than 1,000 charge-discharge cycles. With the nanodots, the material's electrical storage capacity was four times higher than the original MXene, almost reaching the theoretical maximum capacity of graphite. The laser-inscribed material also showed no loss of capacity in the cycling tests.
In light of these results, they believe that laser inscription could be used as a general strategy to improve the performance of other "MXenes" material structures. This could, for example, lead to the development of a new generation of rechargeable batteries using a cheaper and more abundant metal than lithium. In addition, unlike graphite, MXenes material structures can also be embedded with sodium and potassium ions.
Aug 16, 2023
Leave a message
Laser Pulses May Help Develop Next-generation High-capacity Batteries
Send Inquiry





