Laser is a kind of light. Like its electroluminescence in nature, laser light is generated by the transition of atoms (molecules or ions) and is caused by spontaneous radiation. Although the laser is light, it is significantly different from ordinary light. The laser only relies on spontaneous radiation for the first extremely short time. The subsequent process is completely determined by the laser radiation. Therefore, the laser has a very pure color and almost no divergent directivity. .
Engraving machine, extremely high luminous intensity, and the laser has high coherence, high intensity, and high directivity. After the laser is generated by the laser, it is transmitted by the mirror and irradiated on the processed object through the focusing mirror to make the processed object (surface) Due to strong thermal energy, the temperature increases sharply, which causes the point to rapidly melt or vaporize due to high temperature, and cooperates with the laser trajectory to achieve the purpose of processing.
The speed of laser head movement is usually expressed in IPS (inches per second). High speed brings high production efficiency. Speed is also used to control the depth of the cut. For a specific laser intensity, the slower the speed, the greater the depth of the cut or engraving. The speed can be adjusted using the panel of the engraving machine, or the print driver of the computer.
In the range of 1% to 100%, the adjustment is 1%. Hummer's advanced motion control system allows you to still get super fine engraving quality when engraving at high speed. For a specific engraving speed, the greater the intensity, the greater the depth of the cut or engraving. The intensity can be adjusted using the panel of the engraving machine, or it can be adjusted using the computer's print driver.
