Any machine parts will be accompanied by a long period of use caused by a certain amount of wear and tear, laser marking machine is no exception. Therefore, in the use of laser marking machine process, the need for regular maintenance of its accessories. Especially with the increasing use of the machine, pay attention to the replacement of wear and tear accessories, otherwise it will lead to the entire machine can not work properly.
In order to make the laser marking machine has a longer use time, the operator needs to pay attention to the maintenance of laser machine accessories in the usual marking work, so as to increase the service life of the marking equipment, save costs and create greater benefits. This article will share some laser marking machine accessories maintenance methods.
Laser marking machine field mirror
Laser marking machine field mirror needs to be cleaned regularly, because it is outside, and marking will have dust, long-term non-cleaning lens above a layer of ash, and will affect the quality of the laser marking machine light, serious may be the lens burned.
Laser marking machine oscillator
The laser marking machine's vibration mirror does not move, or a direction does not move, you need to check whether the vibration mirror XY status indicator is normal, check whether the vibration mirror wiring is loose, check whether the vibration mirror switch power supply is normal, check whether the USB board card vibration mirror output signal is normal.
Fan cleaning
The use of the fan for a long time will make the fan inside the accumulation of a lot of solid dust, so that the fan produces a lot of noise, but also not conducive to exhaust and deodorization. Therefore, the fan should be cleaned regularly to ensure the normal use of the machine.
Laser marking machine reflector lens
There will be a reflector lens on the marking machine. This lens will cause some damage with the increase of use time, so this lens must be replaced regularly, otherwise it will affect the use of laser marking machine.
Chiller Alarm
If the laser chiller alarm is found, the laser marking machine is unusable, because the alarm situation, the laser power supply is unable to start, the laser chiller alarm is mainly the flow alarm and compressor high pressure alarm, there is an alarm, we should first check whether the laser marking machine chiller water pressure, mainly to check whether the chiller water pressure is normal, if there is no flow, then it may be the water pump of the chiller If there is no flow, then it may be the water pump of the chiller is bad or not enough pressure, and vice versa is the flow switch of the chiller is damaged, you need to repair and handle the fault according to the actual situation.
The use of laser marking machine environment
The importance of the environment on the laser marking machine is self-evident, it is directly related to the marking effect of the whole machine. In the process of use, strictly comply with the operating procedures, pay attention to the order of switching on and off the machine. This will affect the service life of the machine. The correct switching of the laser marking machine can improve its service life.
Every time you turn on the machine, check whether there are signs of looseness in the water joint part, whether there is water leakage, such as water leakage, then quickly press the emergency stop switch for maintenance.
With the development of laser technology, the application of laser marking machine is becoming more and more extensive, especially in industries with high requirements for marking accuracy. If your workshop needs a high-efficiency and high-precision marking equipment, fiber laser marking machine is a good choice.
