Jun 05, 2023 Leave a message

Advantages Of Femtosecond Lasers For Medical Device Manufacturing Cutting

Fiber lasers, with their relatively low cost, scalable power, and high reliability, have dominated cutting and drilling applications in the medical device manufacturing industry for many years. Femtosecond lasers offer significant advantages in terms of cut quality, but have a long history of...
Fiber lasers, with their relatively low cost, scalable power, and high reliability, have dominated cutting and drilling applications in the medical device manufacturing industry for many years. Femtosecond lasers offer great advantages in terms of cut quality, but for a long time they have only competed for a small market share. However, as the graph shows, sales figures for Coherent tube cutting systems indicate a sudden and extremely rapid shift in this situation. Let's take a look at what is driving the dramatic growth in market share for femtosecond lasers compared to fiber lasers.

The use of femtosecond (fs) lasers for material processing has long been known to offer several unique advantages. With conventional lasers like fiber lasers, most material interactions are photothermal, which creates a heat-affected zone (HAZ). In precision applications, this limits the minimum size of parts that can be cleanly machined without melting, can lead to unacceptable functional or cosmetic damage, and often also requires mechanical post-treatment work (e.g., deburring, manual polishing, or reaming). In contrast, femtosecond lasers provide pulses that can be several orders of magnitude shorter and have much higher peak power, allowing for instantaneous evaporation of material before heat is transferred to the part. This cut is more accurate and relatively cooler, producing smaller parts without recast debris and therefore without the need for grinding or polishing. In addition, this method is suitable for parts made of virtually any material, including mixed materials such as polymer/metal coatings.

Miniaturized devices with finer detail (e.g., frames)
The growing market demand for medical devices with smaller, thinner-walled components and more cutting detail (e.g., peripheral stents, Hippocampus, minimally invasive tools, etc.) has greatly contributed to the recent increase in market share for femtosecond laser processing. We have seen this particularly true for devices configured for tube cutting geometries such as the one shown above. In addition, the use of more challenging and expensive materials is also an important driving factor. An example is magnesium bioabsorbable stents, where post-processing after fiber laser processing may reduce their yield by up to 50%, while femtosecond laser cutting does not require post-processing. Other industries (e.g., displays/electronics) are gradually adopting this technology, creating additional market demand that is further driving laser manufacturers to develop advanced femtosecond laser systems and machines.
Where femtosecond lasers are advancing -Higher power, lower cost per watt
In fact, femtosecond lasers have reached a whole new level of maturity in terms of performance, economics and reliability. Power is a particularly important performance parameter, as it directly determines production volumes, and Coherent's Monaco series is part of a new generation of femtosecond lasers that have increased their maximum power continuously from less than 20 W to more than 60 W over the timeframe covered by the sales chart. The cost per watt of most femtosecond lasers has also recently declined. As a result, these lasers can not only help increase throughput, but also reduce the cost per part. Earlier Monaco models have been used for several years in demanding 24/7 production environments, highlighting the higher reliability of femtosecond lasers, which in turn helps reduce the total cost of ownership. Combined with the cost savings realized by eliminating mechanical post-processing steps, this can be very cost effective for some precision cutting tasks.
Streamlined automated machines
It is true that most medical device manufacturers want not just a laser, but a complete laser system. The final step in realizing this vision is the introduction of advanced femtosecond lasers to the market. Femtosecond lasers allow for streamlined automated part handling and monitoring, along with easy-to-use software that does not require extensive training or expertise to get started. This gives users the flexibility to quickly switch between different machines in small batches or to run high-volume components unattended for long periods of time. an example of this is Coherent's StarCut Tube series of machines, which incorporates new operating software: Coherent's frameWork laser software.
It comes down to this: should I choose a fiber laser or a femtosecond laser, or both?
Today, for anyone in the medical device manufacturing industry, one of the major challenges in purchasing a new machine is deciding between a femtosecond laser and a fiber laser. Fiber lasers also have the major advantage of being able to cut faster and cut thicker parts because of their higher available power. However, for thinner parts, the power and speed advantage is often greatly reduced due to the need to reduce repetition frequency and avoid accumulated thermal damage. So, in the final analysis, the choice of which laser is most appropriate really depends on the specific application scenario.
Because of this, for the new lasers used to cut medical devices, it is now possible to choose either a femtosecond laser or a fiber laser, or even a mix of both. With the latter option, users can switch seamlessly between the two lasers, even on individual jobs, as there are situations where cutting with a fiber laser may be more economical than with a femtosecond laser (and vice versa).

 

Send Inquiry

whatsapp

Phone

E-mail

Inquiry