50W Portable Laser Cleaning Machine for Tyre Mold

50W Portable Laser Cleaning Machine for Tyre Mold

Product Features

• Super low running cost. Compared with other cleaning methods, our operation and use costs are the lowest, since there's no need of any consumables, only electricity cost like an household appliance.

• Linear and 2D spiral scanning modes. Different from the scanning modes of other brands of laser cleaning machines, we have two cleaning scanning modes. One is linear and the other is 2D spiral scanning modes. The 2D spiral scanning mode prevents zebra patterns from being left on the surface of the substrate;

• High-Tech and non-contact cleaning. Non-contact laser cleaning mode optimizes the cleaning effects on targets and ensure the safety of operators.

• Environmental friendly. Laser cleaning is a kind of green cleaning method, which does not need any chemicals or produce any pollutants.

Product Details

Laser Cleaning in Application of Tyre Mold

In the production of tires, the mold is an indispensable tool. The quality of the mold directly affects the quality of the tire. There are patterns and texts in the mold of tires. These are the carving process, relatively delicate, and easy to be covered by rubber in the process of use. The use of mold is under a certain pressure and high frequency conditions, which are bound to accumulate a large amount of rubber material, when the materials accumulate to a certain extent, it will affect the surface shape of the tire, resulting in the product to become defective or waste, so the surface of the mold must be cleaned frequently.

The application of the mould promotes the industrial production, and the cleaning of mould has been a concern of people. After a long period of exploration and practice, people have accumulated a lot of ways to clean the mold. At first, the method of high temperature brine immersion was used for mold cleaning, but this method is low efficiency, mainly used for cleaning small molds, while it is time-consuming and laborious for large molds. With the development of times, sandblasting cleaning, become the most commonly used method of cleaning industrial equipment, with which sand, glass balls or plastic beads are commonly used in the specific application.

However, this cleaning method will damage the surface of the mold, affect the quality of the product, shorten the service life of the mold, thus increasing the production cost.

▼ Some Cleaning Samples

In addition 50W, there are 60W, 100W, 120W power for you to choose.

Hot Tags: 50w portable laser cleaning machine for tyre mold, China, manufacturers, suppliers, low price, tyre mold clean,green clean methed, metal engraving laser, 30W Mopa Fiber Laser, 30w mini fiber laser engraver, handheld fiber laser engraving machine, laser marking machine for metal, laser marking equipment