200W Tyre Metal Mold Cleaning Laser Cleaning Machine
Laser Power: 200W
Laser Wavelength: 1064nm
200W Laser Cleaning Machine for Tyre Metal Mold Cleaning
Product Introduction
This 200W laser cleaning machine is a kind of medium power laser cleaning machine. It can realize a high efficiency of laser rust cleaning, about 4 square meters per hour. The core part, laser source is exported from Gemany or USA, ranging from high powers and low powers for your section.
Product Features
◆ The cleaning galvo-scanner adopts high-speed motors with advantages of small size, light weight, high speed, high precision and good stability. The comprehensive performance index has reached the international leading level in this field.
◆ Unique self-developed spiral cleaning mode
More uniform cleaning surface, WITHOUT zebra crossing compare with traditional laser cleaning. No any damage to substrate of components. Adjustable cleaning size and precise location.
◆ Professional laser cleaning optical design
High damage threshold of scanning mirror and F-theta lens. Continuously long-time working more than 10 hours. High cleaning efficiency and safety. Simple structure, Auto-focus, easy to operate. Automated cleaning by hand-held or work with manipulator.
Comparison between Different Cleaning Methods
Laser Clean
Cleaning Method | By Laser, Non-contact |
Damage | No |
Cleaning Efficiency | High |
Consumables | Only need electricity |
Cleaning Effect | Excellent, High cleaness |
Precision | Precise control, High precision |
Safety/Environmental protection | No any pollution |
Manual Operation | Easy operation, Hand-held or automatic |
Cost Input | High initial cost,No consumables, Very low maintenance cost |
Chemical Clean
Cleaning Method | Chemical reagent, Contact material |
Damage | Yes |
Cleaning Efficiency | Low |
Consumables | Chemical reagent |
Cleaning Effect | Ordinary, uneven |
Precision | Not control, Very low precision |
Safety/Environmental protection | Seriously polluting environment |
Manual Operation | Complicate operation, High requirements to workers, Pollution protection measures are needed. |
Cost Input | Low initial cost, Very high consumables cost |
Mechanical Clean
Cleaning Method | Mechanical/ Sandpaper, Contact material |
Damage | Yes |
Cleaning Efficiency | Low |
Consumables | Sandpaper / Grinding wheel /abrasive stone /etc. |
Cleaning Effect | Ordinary, uneven |
Precision | Not control, Medium precision |
Safety/Environmental protection | Polluting environment |
Manual Operation | Expend manpower, Pollution protection measures are needed |
Cost Input | High initial cost,High consumable and labor costs |
Dry Ice Clean
Cleaning Method | Dry ice, Non-contact |
Damage | No |
Cleaning Efficiency | Medium |
Consumables | Dry ice |
Cleaning Effect | Good, but uneven |
Precision | Not control, Very low precision |
Safety/Environmental protection | No pollution |
Manual Operation | Easy operation, Hand-held or automatic |
Cost Input | Medium initial cost, High consumables cost |
Ultrasonic Clean
Cleaning Method | Cleaning agent, Contact material |
Damage | No |
Cleaning Efficiency | Medium |
Consumables | Special cleaning fluid |
Cleaning Effect | Good, but less cleanliness |
Precision | Cannot specify a range to clean |
Safety/Environmental protection | No pollution |
Manual Operation | Easy operation, But need to add consumables manually |
Cost Input | Low initial cost, Medium consumables cost |
Knowledge:
What is Laser?
The light from which an atom is excited, hence it is named, "laser" .
when an electron in an atom absorbs energy and jumps from a low level to a high level, then falls back from a high level to a low level, the energy released is emitted in the form of photons. A beam of photons (a laser) that is induced (excited), the optical properties of which are highly consistent. Comparing common light, laser has better illuminant monochromatic and directional character, and higher brightness.
Stimulated Emission and Laser
In 1917, Einstein theorized that in addition to spontaneous radiation, particles at higher Levels of E2 could jump to lower levels in another way. He pointed out that when the photon with the frequency of
V= (E2-E1) /h is irradiates, it will also cause particles with a certain probability quickly transit from the energy level E2 to energy level E1, and at the same time radiate two foreign photons with same frequency, phase, polarization state and the direction of propagation. This process is called stimulated radiation.
We can imagine, if a large number of atoms are in the high level E2, when there is a photon with frequency V= (E2 - E1)/h is radiated, then stimulate the atoms in level E2 to produce stimulated radiation. Then we can observe two identical photons, the two photons continue to excite atoms on E2 level, make them produce stimulated radiation again, then we can get four photons with same characteristics.
All above procedures mean that the signal of the original light is magnified. The light produced and amplified by stimulated emission is a laser.
Model | MRJ-FL-C200（domestic） | ||
Laser Power | 200W | ||
Laser Wavelength | 1064nm | ||
Pulse Energy | 1-10mJ | ||
Focal Length | F=160mm / F=254mm(Customizable) | ||
Clean Head Weight | 2.25kg | ||
Touch Screen | 7inch | ||
Cable Length | 5m(Customizable, up to 8m) | ||
Scan Length | 1-100mm(Customizable) | ||
Scan Width | 1-20mm(Customizable) | ||
Working Temperature | 0℃-45℃ | ||
Storage Temperature | -10 to + 60℃ | ||
Operating Humidity | 10% - 90% | ||
Machine Weight | 114.9kg | ||
Machine Size | 770x568x993mm | ||
Cooling Method | Air Cooling | ||
Power Consumption | 2000W | ||
Input Power | Single-phase 220VAC ± 10%, 50-60Hz | ||
Optional Accessory | Hand-held / Automated | ||
Hot Tags: 200W Tyre Metal Mold Cleaning Laser Cleaning Machine, China, manufacturers, suppliers, low price, laser engraving machine for production line, 50w flying laser marking, online flying laser marking machine, 30w laser engraver, mopa fiber laser marking, 50w flying fiber laser engraver
You Might Also Like
Send Inquiry