300 Watt Pulse Laser Cleaning Machine

300 Watt Pulse Laser Cleaning Machine

Product Introduction

300 watt pulse laser cleaning machine is equipped with a fiber laser that has a 300W high power output, which allows it to remove rust quickly and efficiently. It can be used on a wide range of metals, including steel, iron, aluminum, and copper.

In addition to its rust removal capabilities, this 300W machine can also be used for surface cleaning, engraving, and marking. Its versatility makes it a valuable addition to any metalworking workshop or factory. Laser cleaning machine is a powerful and effective tool that can save time and money by eliminating the need for harsh chemicals or manual sanding and grinding.

Product Features

Caution

• As the power density increases of the laser cleaning machine, the rust layer removal efficiency proportionally, when the power density reaches a certain threshold value (about 1.4E+08 w/cm).
• In the power density, spot overlap rate is determined, the cleaning spot size and the number of cleaning, that is, a single removal thickness remains unchanged. The larger the spot size, you can improve the scanning speed and filling spacing. On the one hand, to improve cleaning efficiency, on the other hand, cleaning speed to improve the substrate heat accumulation reduced, the substrate surface oxidation is improved, the removal ability becomes stronger.
• Power density of the laser cleaner continues to improve, on the basis of clean rust, without damaging the substrate power density range of about 7.5E+07 w/cm2 ~ 1.5E+08 w/cm2.
• When the spot overlap rate is low, due to the existence of small uncleaned areas in the scanning area (the appearance of pitting underline), and then the rust layer residue. Overlap rate is high, due to the cumulative thermal effect of the light pulse, the substrate appears oxidation yellowing.
• Experiments show that the machine clean, and the substrate does not appear obvious oxidation of the overlap rate range is about: 20% ~ 50% (theoretical calculation of circular spot covering the cleaning area of the minimum overlap rate of 25%). When the power density is appropriate, comprehensive cleaning effect, efficiency factors, the development of cleaning process, should make the spot overlap rate > 20%.
• The actual cleaning of the laser cleaning machine, according to the size of the cleaning spot, a reasonable determination of the filling spacing, to avoid unevenness of the bottom line after cleaning.

Hot Tags: 300 watt pulse laser cleaning machine, China, manufacturers, suppliers, low price