The main reasons that affect the operating speed of laser marking machines can be divided into: one is the equipment itself, and the other is the processed workpiece. The main reasons for the equipment are the laser frequency, the laser beam spot mode, and the light speed divergence angle laser power. machine and laser spot size.
1. Marking density
In the same format, the same light spot, and the same depth, if the density of the marking is higher, the corresponding speed of marking will be slower, because the density can directly increase the marking area.
2. Marking range
The marking speed of a large area is slower than the marking speed of a small area, because the deflection area of a large area marking galvanometer increases, which will naturally have a certain effect on the marking speed.
3. Marking depth
According to requirements, if you need to deepen the marking depth, you need to adjust the parameters of the fiber laser marking machine and increase the power and current parameters of the fiber laser marking machine, which will affect the marking speed.
4. The laser spot size
The density of marking characters can also affect the speed. Under the same marking area, the same light spot and the same depth of marking. In this way, the marking density will be higher and the marking speed will be slower. After all, the density of characters to be marked is very large, which is equivalent to directly increasing the area to be marked.
