May 25, 2023 Leave a message

Laser Soldering Process: LCD Motherboard Market Status and Processing Applications

High-quality BGA tin ball shall have the characteristics of true roundness, brightness, good conductivity and mechanical linkage performance, tiny ball diameter tolerance, oxygen content bottom, etc.. Its end products are digital cameras, MP3, MP4, notebook computers, mobile communication equipment (cell phones, high-frequency communication equipment), LED, LCD, DVD, computer motherboards, PDA, car LCD TV, home theater (AC3 system),positioning system and other consumer electronics. It is reported that in the field of 3C electronics, the global demand for tin balls up to more than ten billion U.S. dollars a year, China is the world's largest use of tin balls in the country, and the demand is still climbing year by year. This provides a broad application market and development prospects for tin ball products.

 

LCD motherboard market status
Panel is the main component of the display, there are mainly LCD panels, Mini Led and OLED three types, of which LCD panels are still the current mainstream applications. Liquid crystal display (LCD), its main working principle is to change the voltage of the liquid crystal layer through the driver IC, adjust the angle of deflection of liquid crystal molecules to control the passage and blocking of light, and then use the color filter to achieve the output of graphics.
LCD panel industry can be divided into upstream basic materials, midstream panel manufacturing and downstream end products. Among them, the upstream basic materials include: glass substrate, filter, polarizer, liquid crystal, driver chip, etc.; midstream is LCD LCD production line; downstream end products include: TV, computer, cell phone and other consumer electronics.


From the global LCD display panel industry market size, according to relevant statistics, the global display panel industry market size reached $139.2 billion in 2021, of which the LCD display panel market size of $97.3 billion. It is expected that in 2022 the global panel market size will decline to 109.5 billion U.S. dollars, down 21.40% year-on-year, and in 2023 the market size will rebound slightly to 115.6 billion U.S. dollars.


In terms of domestic LCD industry production capacity, according to the China Electronic Materials Industry Association, China's LCD production capacity in 2021 is 204.89 million square meters, an increase of 16.42% from 2020, while it is expected that China's LCD production capacity in 2025 will reach 286.33 million square meters, with a CAGR of 8.73%. With the development of intelligent technology, will certainly drive the LCD industry motherboard explosive growth.

Most of the current mainstream LCD motherboard welding process is still using the traditional manual soldering iron welding process, high labor costs, slow production efficiency, the traditional welding process led to a decline in product qualification rate. Automatic temperature-controlled laser welding machine perfectly solves the problem of mass production of LED motherboards.
 

Laser welding method
LCD motherboard laser welding machine heats the surface of the workpiece by laser radiation, and the surface heat spreads to the inside through heat conduction. By controlling the parameters of laser pulse width, energy, peak power and repetition frequency, the workpiece melts and forms a specific molten pool. Due to its unique advantages, it has been successfully applied in precision welding of micro and small parts and welding of thin-walled plates.


LCD motherboard laser welding process
LCD motherboard laser welding machine after the electronic devices and circuit boards are assembled and into the welding station, under the control of the controller, the first visual device for visual positioning of the welding position, and then through the tin feeding mechanism to move the solder to the above-mentioned welding position, the laser welder emits laser to the welding position and begins to heat, while the temperature controller to monitor the welding position, measuring the temperature of the solder after being irradiated by the laser When the temperature increases above the melting temperature of the solder, the solder feeder starts to feed the solder at the set speed, while the temperature controller monitors the soldering temperature, and when the soldering temperature is higher than the set temperature, the output power of the laser welder is reduced through the controller, and when the soldering temperature is lower than the set temperature, the output power of the laser welder is increased, so that the soldering temperature is always kept within the set area to prevent the temperature from being too high The welding temperature is always kept within the set area to prevent damage to the workpiece if the temperature is too high and to prevent welding from being completed if the temperature is too low.


Tin ball laser welding process
Because laser welding only heats the connection part locally, there is no thermal impact on the component body, and the heating and cooling speed is fast, the joint is finely organized and highly reliable. At the same time, laser solder ball welding is non-contact processing, there is no stress generated by traditional welding, no static electricity, very friendly to the components with high thermal impact. For tiny components, laser processing precision, laser spot can reach the micron level, processing time / power program control, processing accuracy is much higher than the traditional soldering iron soldering and HOT BAR soldering, the use of small laser beam instead of soldering iron tip, in a small space can also be operated and other advantages, so the laser soldering process can be widely used in LCD motherboards and other consumer electronics industry.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry