The laser marking machine can be used on metal or non-metal, and can also be used on materials with high accuracy requirements. Generally, the logos, patterns and signs we see are from the marking machine, but many people use the marking machine. The internal parts look at the lens which is very heavy and neglected. How do we clean and replace the accessories of the laser marking machine?
1. Wash by hand, blow dry or wait to dry;
2. Put on a finger cot and gently remove the lens for inspection;
3. The dust on the lens surface is blown off with air balloon or nitrogen, and the cotton ball of the lens liquid adheres to the residue;
4. Gently wipe the lens paper with the amount of liquid droplets on the lens, and wipe it to avoid rotation;
5. Replace the mirror paper and repeat these steps. Do not use a piece of trial paper all the time, otherwise stains will remain on the lens;
The laser marking machine is mainly divided into five parts: laser, laser lens, vibrating mirror, marking card, computer and housing processing part.
