As an industrial processing equipment, the laser marking machine should stop regular maintenance and maintenance. This will not only maintain good performance, but also extend the working life of the laser marking machine equipment. Although the laser marking machine has a higher level of automation, a large part of it is the mechanical movement of the slider, and the mechanical movement is easy to form wear. This requires us to oil the slider of the laser marking machine. Already.
First, turn off the power to the machine and make sure that the machine is in a suspended state;
Secondly, remove the lens on the slider with a professional removal tool. Be careful when removing the lens and pay attention to maintaining the lens. Then, remove the guide rail to expose the joint between the slider and the guide rail. If the slider lacks oil, it will be at this time. See that the balls are shiny, squeeze the smooth oil in the needle tube a little when oiling, add the oil to the gap with a wooden toothpick, and use a rolling slider when refilling, so that the smooth oil makes every ball as much as possible;
After putting the oil on, don't rush to reinstall the device, turn on the device's power, enter the debugging mode, slow down its running speed, and let the movable slider gradually run to see if it works well and whether the smooth oil In place.
After confirming, re-assemble the disassembled guide rails and return the lens.
The laser marking machine is a new star in the current market. It not only has the characteristics of other laser marking machines, such as clear marking, fast marking speed, no optical pollution, etc., it has a smaller spotlight and can complete ultra-precision marking. It has common advantages in the marking of glass products and electronic components.
