Sep 04, 2023 Leave a message

Application of Laser Particulate Matter Sensor in Dust Monitoring of Closed Coal Yard

Dust problems in closed coal yards seriously affect environmental quality and workers' health. Traditional monitoring methods often have some limitations, such as low accuracy and susceptibility to interference. In contrast, laser particulate sensors have the advantages of high accuracy, high sensitivity and fast response, which can better meet the requirements of dust monitoring.
In a closed coal yard, a large amount of dust is generated in various production processes, such as coal conveyance, coal blending, screening, crushing and transportation. These dusts are not only hazardous to the health of the site staff, but also pollute the atmosphere.
In the production process, some solid particles that can be suspended in the air for a long time will be produced, and these particles are called production dust. They not only contaminate the production environment, but may also have a negative impact on the health of those working on site. Prolonged inhalation of certain types of production dust may lead to a systemic disease dominated by fibrosis of lung tissue, i.e. pneumoconiosis.
Therefore, in order to strengthen the scientific management of dust control and dust removal measures at closed coal sites and to protect the health of the workers and the atmospheric environment, it is necessary to construct a dust monitoring system for closed coal sites to detect the concentration of dust in the operating environment.
Laser particulate matter sensor can measure the total dust and respiratory dust concentration in the operating environment of the closed coal yard. TF-LP01 is a laser particulate matter sensor developed by Figaro of Japan, which is a small module that utilizes the principle of light scattering for the detection of dust particles in the air, and it can accurately detect the values of specific PM1.0, PM2.5, and PM10, and the values of USART (3.3V TTL level) and PWM (3.3V TTL level) and PWM (3.3V TTL level) can be accurately detected. Level) and PWM (to be customized) output, with a small size, high detection accuracy, good repeatability, good consistency, real-time response can be continuously collected, strong anti-interference ability, the use of ultra-quiet fan, the sensor factory 100% testing and calibration, etc., for a variety of occasions that require PM value detection.
Japan figaro Laser Particle Sensor PM2.5 Sensor
At present, the laser particle sensor TF-LP01 has been widely used in the following fields:
1. For industrial and mining enterprises and labor departments to determine the concentration of dust at the production site - coal mine dust detection
2. Monitoring of respirable particulate matter in public places by health epidemic prevention stations
3. Environmental protection monitoring department of the atmosphere dust detection, pollution source investigation
4. Municipal smoke monitoring
5. Scientific research, filter media performance testing and other aspects of field testing
6. Measurement of dust concentration on site, monitoring of dust concentration at exhaust port
7.Pharmaceutical manufacturing testing
8.Occupational health and safety testing
9. Management of manufacturing processes in factories requiring clean air, precision instruments, test equipment, electronic components, food, and pharmaceuticals.
10. Various research institutes, meteorology, public health, industrial labor health engineering, air pollution research, etc.
11. Dust testing at construction or demolition sites, exposure monitoring at construction sites
12. Indoor air quality testing, air purification, such as: air purifiers, air conditioners, dehumidifiers, new ventilators or systems, formaldehyde detectors, smart home, etc.
13. Vehicle industry, vehicle air detection and purification, mobile vehicle urban air testing station

Send Inquiry

whatsapp

Phone

E-mail

Inquiry