
Fiber Laser Marking Machine for Water Pipe Connector Mark
We have been also specializing in improving the things administration and QC system to ensure that we could preserve terrific gain within the fiercely-competitive company for 5W Enclosed UV Laser Engraving Machine, high quality welding, marking on aluminum. We fully implement the perfect brand strategic planning, with the production operation, product research, marketing three aspects of talent. We believe that the company has the responsibility to establish an environment for its employees, implement relevant policies and avoid worries. We take the excellent products as the medium, and sincerely make friends all over the world. Continuously improving and perfecting quality management, and continuing to provide customers with high-quality products and services are our eternal goals.
20W 30W Fiber Laser Marking Machine for Aluminum
Product Introduction
◆ MRJ-FL-20N is our newest type fiber laser marking machine. It has an enclosed and integrated design. The dust produced in the marking process can be collected in the cabinet without being absorbed by users.
◆ The cabinet cover has a sheet of laser protective glass by which users can observe the marking process and can also prevent the radiation of laserbeam.
◆ A electronic Z-axis button with homing function is equiped. It doesn't need manual hight adjustment, and can automatically go back to the base point.
◆ The cover is a protective device. Only the cover is closed, would the machine begin to mark.
Product Features
Galvanometer
◆ It is mainly suitable for high-speed and on-line flight marking, with a standard incident spot diameter of 10mm. The galvanometer system has the characteristics of zero drift, fast speed, small size, low temperature, stable and reliable operation, etc. The comprehensive performance index has reached the international professional level.
Field Lens
◆ The high-quality field lens can improve the ability of edge beam going to the detector and uniform the non-uniform illumination on the photosensitive surface of the detector. In a same main optical system, the additional field lenses will reduce the detector area. If the same detector area is used, the field of view can be enlarged and the incident flux increased.
Software
◆ User-friendly and easy-to-operate interface.
Advantages
1.High power and high quality laser output, high electro-optic conversion efficiency.
2.The mode can be switched to handle different processing tasks at the same time.
3. It can be directly integrated into user devices.
Product Parameters

Product Application
Anodic alumina is that coating a layer of dense alumina in aluminum and aluminum alloy surface to prevent oxidation, improve the corrosion resistance of aluminum alloy material, and enhance the surface hardness and wear resistance of aluminum alloy. Electrolytic coloring can be used to dye and enrich product appearance color. Therefore anodic alumina process is commonly used on shells of 3C products such as mobile phones, tablets, notebooks and so on.


Nowadays, a product is usually made with brand logo on the appearance and shell. On the one hand, it is to show the product image, on the other hand, it can also play a role in anti-counterfeiting. Traditional anodized aluminum marking is done by removing the anodized layer to expose the silvery white aluminum base material, or to make a black effect on the surface of the anodic layer to form the brand identity. Anodic aluminum mirror is a new application in the field of marking, with high difficulty and high-grade effect. It is mainly used for logo marking of the outer shell of 3C products such as notebook computers, replacing the traditional process of pasting mirror stainless steel sheets on the products.
Craft and processing analysis guidance
1. To achieve laser polishing mirror effect, the shading must be completely smooth, no stripes and grain sense.
2. High speed galvanometer is required to ensure sufficient polishing times and uniformity of effect.
3. Filling must be tight to achieve full polishing, the smooth brightness is higher.
Processing mode: precision machining, fine welding, metal/non-metal fine cutting, etc.
Application industry: power battery, aerospace, power grid, 3C electronics, etc.
Model | MRJ-FL-20N | MRJ-FL-30N | MRJ-FL-50N |
Laser Power | 20W | 30W | 50W |
Laser Wavelength | 1064nm | 1064nm | 1064nm |
Beam Quality | M2<1.6 | M2<1.6 | M2<2.0 |
Repetition Frequency | 20-80KHz | 30-80KHz | 50-120KHz |
Marking Field | 110mmx110mm | 110mmx110mm | 110mmx110mm |
Marking Depth | ≤1.2mm | ≤1.5mm | ≤2.0mm |
Marking Line Speed | ≤14000mm/s | ≤14000mm/s | ≤14000mm/s |
Minimum Line Width | 10um | 10um | 10um |
Minimum Character | 0.15mm | 0.15mm | 0.15mm |
Repetition Precision | ±0.005mm | ±0.005mm | ±0.005mm |
Power Consumption | ≤600w | ≤800w | ≤1000w |
Maintenance-free Time | 100000hours | 100000hours | 100000hours |
Input Power | Single Phase 110VAC/220VAC/50-60Hz | ||
Cooling Method | Air Cooling | Air Cooling | Air Cooling |
Based on the original products, our company continuously introduces new technologies and develops various new Fiber Laser Marking Machine for Water Pipe Connector Mark to meet the needs of the market. In the process of market globalization, we are willing to work with friends from all walks of life to meet all kinds of challenges with enterprising spirit. Our company has advanced equipment and can conduct comprehensive experiments and tests on product performance.
You Might Also Like
Send Inquiry









