Aurora Laser 50W Backpack/ Portable Fiber Laser Cleaning Machine

Aurora Laser 50W Backpack/ Portable Fiber Laser Cleaning Machine

Model: MRJ-FL-C50
Laser Power: 50W
Laser Wavelength: 1064nm
Send Inquiry
Product Introduction

Our product quality has always been in a leading position in the 5W Enclosed UV Laser Marking Machine, wood laser engraving, laser rust remover industry, and all indicators have reached international standards. We will win your trust and support in us with the most reliable product quality and the best business reputation. Our company adheres to the tenet of quality as life and honesty as the essence, pays attention to the cultivation and introduction of talents, so as to make every customer satisfied with our products and services. Our tenet is 'Reasonable prices, efficient production time and best service' We hope to cooperate with more customers for mutual development and benefits. We hope to cooperate with suppliers who share similar values with us, and work together towards the same standards.

50W Portable Laser Cleaning Machine for Tyre Mold


Product Features

  • Super low running cost. Compared with other cleaning methods, our operation and use costs are the lowest, since there's no need of any consumables, only electricity cost like an household appliance.

  • Linear and 2D spiral scanning modes. Different from the scanning modes of other brands of laser cleaning machines, we have two cleaning scanning modes. One is linear and the other is 2D spiral scanning modes. The 2D spiral scanning mode prevents zebra patterns from being left on the surface of the substrate;

  • High-Tech and non-contact cleaning. Non-contact laser cleaning mode optimizes the cleaning effects on targets and ensure the safety of operators.

  • Environmental friendly. Laser cleaning is a kind of green cleaning method, which does not need any chemicals or produce any pollutants.


Product Details

product details


Laser Cleaning in Application of Tyre Mold

In the production of tires, the mold is an indispensable tool. The quality of the mold directly affects the quality of the tire. There are patterns and texts in the mold of tires. These are the carving process, relatively delicate, and easy to be covered by rubber in the process of use. The use of mold is under a certain pressure and high frequency conditions, which are bound to accumulate a large amount of rubber material, when the materials accumulate to a certain extent, it will affect the surface shape of the tire, resulting in the product to become defective or waste, so the surface of the mold must be cleaned frequently.


The application of the mould promotes the industrial production, and the cleaning of mould has been a concern of people. After a long period of exploration and practice, people have accumulated a lot of ways to clean the mold. At first, the method of high temperature brine immersion was used for mold cleaning, but this method is low efficiency, mainly used for cleaning small molds, while it is time-consuming and laborious for large molds. With the development of times, sandblasting cleaning, become the most commonly used method of cleaning industrial equipment, with which sand, glass balls or plastic beads are commonly used in the specific application.

However, this cleaning method will damage the surface of the mold, affect the quality of the product, shorten the service life of the mold, thus increasing the production cost.

Condition

Cleaning Method

Background

During Cleaning

Problem

Improvement

Noise

Sandblasting

75-85dB

/

/

Dry Ice

75-80dB

100-105dB

Big noise

Wear ear plugs or earmuff

Laser Cleaning

30-40dB

60-70dB

/

/

Dust


Size of Dust

Problem

Improvement

Sandblasting

Big

Dust size is big

Wear dust mask

Dry Ice

Small

Dust size is small, but hard to collect

Wear dust mask

Laser Cleaning

Small

Dust size is small

Dust can be collected by vacuum

Safty


On-Line

Off-line

Problem

Improvement

Sandblasting

/

Good

It can only do clean work off-line

Wear dust mask in case that much dust goes into the lung

Dry Ice

Bad

Good

The user might get cold injury

All protective measures should be worn to prevent frostbite from dry ice

Laser Cleaning

Bad

Good

The user might get burned on the workbench

Don't touch or stare at the laserbeam while cleaning. Wear protective gloves and goggles.

▼ Some Cleaning Samples

tyre mold cleaning2

Model

MRJ-FL-C50

MRJ-FL-C100

MRJ-FL-C120

Laser   Power

50W

100W

120W

Laser   Wavelength

1064nm

Pulse   Energy

1.5mJ

Focal   Length

F=160mm   / F=254mm(Customizable)

Clean   Head Weight

2.64kg

Touch   Screen

7inch

Cable   Length

3m(Customizable,   up to 8m)

Scan   Length

1-100mm(Customizable)

Scan   Width

1-20mm(Customizable)

Working   Temperature

0℃-45℃

Storage   Temperature

-10   to + 60℃

Operating   Humidity

10%   - 90%

Machine   Weight

35.54kg

Machine   Size

634x496x555mm

Cooling   Method

Air   Cooling

Power   Consumption

800W

1000W

1200W

Input   Power

Single-phase   220VAC ± 10%, 50-60Hz

Optional   Accessory

Hand-held   / Automated

In addition 50W, there are 60W, 100W, 120W power for you to choose.

We will further strictly follow the international quality management system, improve product quality, innovate, perfect ourselves, serve the industry, and provide new and old customers with advanced, high-quality, high-performance Aurora Laser 50W Backpack/ Portable Fiber Laser Cleaning Machine with sincere services. We are looking for long-term business partnerships, and ensure our suppliers that they will definitely benefit in both short and long run. We will be market-oriented and customer-oriented to provide high-quality products and services to customers around the world.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry