
2.4mm Tungsten Rod for TIG Welding
We insist on taking quality and credibility, customer requirements as the criterion, and high-quality after-sales service as the guarantee to make good mig welding, 60W Mini Portable Laser Cleaning Machine, logo marking, actively accept customer feedback, and constantly improve ourselves. We establish maintenance files for all customers, set up maintenance departments and implement rapid response mechanisms. Since our establishment, we have always adhered to the business philosophy of customer first, honesty and trustworthiness, mutual benefit, and market first, giving full play to the advantages of talents and information, continuously improving service levels and quality, and implementing diversified sales methods. We have developed rapidly with good reputation and scientific management, and won the praise of our customers. We hope to form a strong sense of value identity and great cohesion within the company to stimulate the enthusiasm of employees. We deeply realize that the quality of products directly related to the company's economic efficiency and sustainable development, thus always maintain high standards of product quality.
Product Introduction
Among all types of lasers, fiber laser is the most attractive laser in price and quality, and is relatively mature laser welding technology. This 500W laser welder adopts fiber laser welding, can achieve much better weld effects and results. It is easy to learn, simple and fast to set up and provides consistent high-quality results across a wide range of materials and thicknesses.

Product Advantages
◆ The operation of Laser welder is easier than traditional MIG & TIG welding, and the speed is 4 times faster.
◆ It is easy to learn and operate with highest process consistency
◆ It can achieve high quality welding of thick, thin and reflective metals without distortion, deformation, undercut or burn-through.
◆ It can do welding of dissimilar metal parts of different thicknesses
◆ The heat input is dramatically low, the heat affected zone is minimized
◆ The part setup is simple and minimal, no post-processing grinding or polishing
◆ It can increase productivity and efficiency with no need for machining or straightening deformed parts.

Laser Welding Application
◆ Copper and copper alloys
Welding copper and copper alloy is easy to produce the problem of not fusion and penetration, so the energy concentration, high power heat source and with preheating measures should be adopted. When the thickness of the workpiece is thin or the structural stiffness is small and there is no deformation prevention measure, it is easy to produce large deformation after welding; and when the welded joint is subject to large rigid constraints, it is easy to produce welding stress. It is also easy to produce hot crack when welding copper and copper alloy. Gas hole is a common defect in copper and copper alloy welding.
◆ Plastic
Laser welding can be used for almost all thermoplastics and thermoplastic elastomers. The commonly used welding materials are PP, PS, PC, ABS, polyamide, PMMA, polyformaldehyde, PET and PBT. And as for some other engineering plastics such as polyphenylene sulfide PPS and liquid crystal polymer, because of their low laser transmittance, they can not be directly used laser welding technology. Generally in the bottom material black carbon will be added, so that the material can absorb enough energy, so as to meet the requirements of laser transmission welding.
◆ Laser welding aluminum alloy
The main difficulty in laser welding aluminum is its high reflectivity to 10. 8 PON wavelength CO2 laser beam. Aluminum is a good conductor of heat and electricity. The high density of free electrons makes it a good reflector of light. The initial surface reflectivity exceeds 90%, that is to say, deep welding must start at a input energy below 10% of one thousand.
◆ Laser welding magnesium alloy
The density of Mg alloy is 36% lower than that of Al, and it is concerned as a high specific strength material. For the AZ31B-H244 alloy (3.27%Al, 0.79%Zn) with a plate thickness of 1.8MM, the optimal welding conditions are the average power of 0.8kW, 5ms, 120Hz, 300mm/s, and the focus size of 0. 42mm. The continuous C02 laser welding has obtained a good penetration weld.
◆ Low alloy high strength steel
In laser welding of low alloy high strength steels, a joint with similar mechanical properties to the base metal can be obtained as long as the welding parameters are selected appropriately. HY-130 steel is a typical low alloy high strength steel after tempering treatment. It has high strength and high crack resistance. The weld seam and HAZ microstructure are a combination of coarse grain, partial fine grain and original microstructure by conventional welding. The toughness and cracking property of the joint are much worse than that of the base metal. Moreover, the weld and HAZ microstructure are particularly sensitive to cold cracks under welding condition.

|
Items |
Parameters |
|
Equipment name |
Hand-held fiber laser welding machine |
|
Laser power |
500W, 1000W, 1500W |
|
Laser wavelength |
1060 nm |
|
Fiber cable length |
Standard:10m |
|
Working mode |
Continuous / modulation |
|
Welding speed range |
0~120 mm/s |
|
Cooling machine |
Industrial constant-temperature water tank |
|
Working environment temperature range |
15~35 ℃ |
|
Working environment humidity range |
< 70% No condensation |
|
Recommended welding thickness |
0.5-3mm |
|
Welding gap requirements |
≤0.5mm |
|
Working voltage |
220 V |
Strict and complete quality inspection means, standardized scientific management system and unique product development plus moderate price and perfect after-sales service, the 2.4mm Tungsten Rod for TIG Welding sell well in various countries. We have formed a professional marketing team and after-sales service system with wide coverage, stability and efficiency. Our company takes corporate responsibility as its important mission, and never forgets its responsibility as a social citizen.
You Might Also Like
Send Inquiry










